Software

From Fabbster Wiki
Jump to: navigation, search

If the software doesn't update automatically, use -> help/ update netfabb in the software!

Contents

Known bugs

  • none so far

Version 4.9.4

Release date find here

changelog netfabb

  • new Firmware included v5.10
  • Warning dialog, if firmware too old
  • fabbster over Ethernet printing and discovery (hardware will be available in Q1/2013
  • added more explanatory error code descriptions
  • axis movement acceleration support
  • extruder retraction support
  • revised material calibration dialog
  • new buildstyles
  • Comb feature: No Retraction within one region
  • calibration bugfix: remove unused buildstyle entries
  • Autocalibration: easier to use
  • added configurable delays before fast jump
  • switch to new FAB file format. Transfer rate to SD Card is now 10x faster
  • AUTO.BGC is now called AUTO.FAB
  • Heated bed support
  • Update Wizard button highlighted
  • Sort buildstyles by name
  • new Sorting Strategy of Contours and Filling
  • Motors are disabled by default and can be enabled by double click on the main button
  • new Temperature Control Strategy
  • Support Type: External Support
  • Added Minimal Cycle Time
  • Bugfix: Extruder extrudes while changing raft
  • Connect Direct Printing Overrides
  • new USB Driver and Installer (important for windows 8 compatibility)


Version 4.9.3

Release date find here

changelog netfabb

The fabbster engine includes a lot changes:

Version 4.9.2

  • Download the new Buildstyles seperate from New_buildstyles
  • Download the firmware updater from Fw_update
  • Calibration for material extrusion can be set automatically now

Version 4.9.1

  • Temperature for regions can be set procentual based on lower and upper temperature
  • Raft temperature can be set procentual based on lower and upper temperature
  • Correction of initial machine settings for fabbster

Version 4.9.0

For netfabb engine 4.9 you need to change some default setting.

Attention:

If you do not change this your fabbster will drive to the top right corner to get a signal from endswitches!

Maschine settings 49.png
Material settings 49.png
Personal tools